Liquid-phase microextraction of protein-bound drugs under non-equilibrium conditions

Recently, we introduced an inexpensive and disposable hollow fiber-based device for liquid-phase microextraction (LPME) where ionic analytes typically were extracted and preconcentrated from 1-4 mL aqueous samples (such as plasma and urine) through an organic solvent immobilized in the pores of a polypropylene hollow fiber and into a 10-25 microL volume of acceptor phase present inside the lumen of the hollow fiber. Subsequently, the acceptor phase was directly subjected to the final analysis by a chromatographic or electrophoretic method. In the present work, attention was focused on LPME of the basic drugs amphetamine, pethidine, promethazine, methadone and haloperidol characterized by substantial differences in the degree of protein binding. Drug-protein interactions in plasma resulted in reduced recoveries and substantially increased extraction times compared with extraction of the drugs from a pure water matrix. However, by addition of 5-50% methanol to the plasma samples, recoveries were comparable with LPME from water samples and ranged between 75 and 100%. The addition of methanol was found not to speed up the LPME process and extractions from plasma were performed in 45 min to reach equilibrium. Because approximately 55-70% of the final analyte concentrations were achieved within the initial 10 min of the LPME process, validation was accomplished after 10 and 45 min of LPME. In general, the results with 10 and 45 min were almost comparable, with precision data in the range 1.2-11.1% (RSD) and with linearity in the concentration range 20-1000 ng mL(-1) (r = 0.999). In conclusion, excellent LPME results may be achieved in a short time under non-equilibrium conditions with a minor loss of sensitivity. In cases of drug-protein interactions, methanol may be added to ensure a high extraction recovery.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Diterpenoids of Isodon macrophylla

Two new ent‐abietane diterpenoids, macrophynin E ( 1 ) and macrophynin F ( 2 ), and a known related ent‐abietanoid (?)‐lambertic acid ( 3 ), together with four known ent‐kauranoids, were isolated from the roots and aerial parts of Isodon macrophylla, respectively. The structures of the new compounds were elucidated on the basis of spectroscopic‐data analysis and chemical correlations.     

Acid Pullulanase from Bacillus polymyxa MIR-23

Within the frame of a screening program aimed at the isolation of amylolytic sporeformers, one strain with high amylolytic activity designated MIR-23 was selected. The microbial characterization was carried out by morphological and biochemical tests and, by means of statistical treatment, was identified asBacillus polymyxa. The organism could grow in acidic conditions (pH 5.0) on a starch medium and produce α-amylase, pullulanase, and α-glucosidase. Batch cultures showed the highest enzyme activities in the stationary phase. Pullulanase activity exhibited an optimal temperature of 52–57°C at pH 4.5–5.5. These properties would allow its use in the saccharification processes in the starch industries.     

catena‐Poly[[[pyridinecopper(II)]bis[μ3‐4‐(2‐oxidobenzylideneamino)benzoato]] dimethylformamide disolvate], a polymer composed of dimeric dicopper building units

The title compound, {[Cu(C₁₄H₉NO₃)(C₅H₅N)]·C₃H₇NO}_n or {[Cu₂L₂(py)₂]·2DMF}_n [py is pyridine, L is 4‐(salicylideneamino)benzoate and DMF is dimethylformamide], is composed of dimeric dicopper [CuL(py)]₂ building units, which are interlinked into a one‐dimensional chain through the formation of Cu—O_COO bonds. The dimeric unit is centrosymmetric, containing two Cu^II atoms linked by bridging phenolate O atoms into a Cu₂O₂ plane with a chelating Cu—O bond length of 1.927 (2) Å and a bridging Cu—O bond length of 2.440 (2) Å. Interchain C—H...O and π–π stacking interactions are responsible for an extensive three‐dimensional structure in which the resulting channels are filled by DMF solvent molecules.     

A Novel Dinuclear Nickel(II) Complex with Three Bridges of Cl–, OAc– and (‐OCH2CH2O‐) Group of N,N, N′, N′‐Tetrakis(2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino) Glycol Ether

The novel dinuclear Ni²⁺ complex [Ni₂(μ‐Cl)(μ‐OAc) (EGTB)]·Cl·ClO₄·2CH₃OH, where EGTB is N, N, N′, N′‐tetrakis (2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino)glycol ether, crystallizes in the orthorhombic space group Pnma with a = 15.272(2), b = 14.768(2), c = 22.486(3) Å, V = 5071.4(12) ų, Z = 4, D_calc = 1.414 g cm^?3, and is bridged by triply bridging agents of a chloride ion, an acetate and an intra‐ligand (‐OCH₂CH₂O‐) group. The nickel coordination geometry is that of a slightly distorted octahedron with a NiN₃O₂Cl arrangement of the ligand donor atoms. The Ni–Cl distance is 2.361(2) Å, and two Ni–O distances are 1.996(5) and 2.279(6) Å. The three Ni–N distances are 2.033(7), 2.060(6), and 2.166(6) Å with the Ni–N bond trans to an ether oxygen the shortest, the Ni–N bond trans to an acetate oxygen the middle and the Ni–N bond trans to Cl the longest.     

Synthesis of new tetrazene（N-N=N-N）-linked bi（1,2,4-triazole）

The reaction of 4-amino-1,2,4-triazole with sodium dichloroisocyanurate (SDCI) afforded new tetrazene(N-N=N-N)-linked bi(1.2,4-triazole) 2a in excellent yield.Increasing the molar ratio of SDCI to 4-amino-1,2,4-triazole,the chlorinated product 1,5,5′- trichloro-4,4′-azo-1,2,4-triazole (2b) was formed.These new compounds have been characterized by MS,~1H NMR,~(13)C NMR,and elemental analysis.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Single Atoms of Iron on MoS2 Nanosheets for N2 Electroreduction into Ammonia

Efforts have been devoted to achieving a highly efficient artificial synthesis of ammonia (NH₃). Reported herein is a novel Fe-MoS₂ catalyst with Fe atomically dispersed onto MoS₂ nanosheets, imitating natural nitrogenase, to boost N₂ electroreduction into NH₃ at room temperature. The Fe-MoS₂ nanosheets exhibited a faradic efficiency of 18.8 % with a yield rate of 8.63 μg mg_cat.⁻¹ h⁻¹ for NH₃ at −0.3 V versus the reversible hydrogen electrode. The mechanism study revealed that the electroreduction of N₂ was promoted and the competing hydrogen evolution reaction was suppressed by decorating the edge sites of S in MoS₂ with the atomically dispersed Fe, resulting in high catalytic performance for the electroreduction of N₂ into NH₃. This work provides new ideas for the design of catalysts for N₂ electroreduction and strengthens the understanding about N₂ activation over Mo-based catalysts.     

Bond energy, aromatic stabilization energy and strain in IPR fullerenes

Various models applied to DFT structures and energies of 2-D and 3-D aromatic molecules shed new light on the effects of strain and aromaticity in these systems. The cyclic pi electron delocalisation does not stabilize the fullerene C60 formation; and 5-6 and 6-6 CC bonds have near-identical bond stretch potentials.